EPever MPPT 3000W Hybrid Solar Charge Inverter 60A 48V 220Ｖ 230V Pure Sine Wave Inverter UPower M6142
The UPower series is a new type of the inverter/charger combining with solar & utility charging and AC output, which adopts a multi-core processor design and advanced MPPT control algorithm, and has the features of high response speed, high reliability and high industrialization standard. It offers four charging modes including Solar priority, Utility priority, Solar and Utility & Solar; two output modes for Battery and Utility, meeting the various application demands.
The up-to-date optimized MPPT tracking technology is adopted for the PV charging modules. It can quickly track the maximum power point of the PV array in any environment and acquire the maximum energy of solar panel in real time;
The advanced control algorithm is adopted for AC-DC charging modules that realize fully digitalized double closed-loop control for voltage and current, with high control precision, small volume. The input range of AC voltage is wide, the output DC charging voltage/current is continuously adjustable in a certain range, and the complete input/output protection functions can offer stable and reliable charging and protection for the battery.
The DC-AC inverter modules are based on full digital and intelligent design. It adopts the advanced SPWM technology, outputs the pure sine wave and converts 24/48VDC to 220/230VAC suitable for AC loads of household appliances, electric tools, commercial units, electronic audio and video devices etc.
The product adopts 4.2 inch LCD display design, which real-time displays the operational data and running state of the system. The comprehensive electronic protection function guarantees more safe and more stable operation of the system.
* Adoption of the advanced SPWM technology, with pure sine wave output
* Fully digitalized voltage and current double closed-loop control
* Advanced MPPT technology, with efficiency no less than 99.5%.
* Four charging mode: Solar priority, Utility priority, Utility & solar and Solar only
* Two output mode: Battery and Utility
* LCD design that enables dynamic display of system running data and operating state
* Provided with common interface and advanced interface
* Multiple LED indicators that instantly indicate the operating state of the system
*2P circuit breaker provided at the utility input end
* Independent control of AC output by AC OUT button
* Battery temperature compensation function.
* Extensive Electronic protection
❷ Captive screw (2 pcs)
❸ AC output terminals
❹ Utility input terminals
❺ Battery input terminals
❻ RTS★ interface
❼ Relay interface
❽ Remote interface
❾ Inverter/charger switch
❿ PV input terminals
⓫ Terminals cover
Designations of models
Schematic Diagram for Connections
The battery is charged in solar priority mode and when the battery voltage is lower than “Auxiliary
Module ON Voltage(VAON)”, the utility starts charging. When the battery voltage reaches to
“Auxiliary Module OFF Voltage(VAOF)”, the utility stops charging.
The battery is charged in utility priority mode and when the battery voltage is lower than
“Auxiliary Module ON Voltage (VAON)”, the solar starts charging. When the battery voltage
reaches to “Auxiliary Module OFF Voltage(VAOF)”, the solar stops charging.
Utility &solar charge the battery
Solar charge the battery
AGM GEL FLD USER
Wire Size& breaker
Output voltage & frequency switch
When Switch 1 is in "ON", the output voltage is selected as 230VAC, and on the contrary as 220VAC;
When Switch 2 is in "ON", the output frequency is selected as 60Hz, and on the contrary as 50Hz.
PV limit Current
PV short circuit
PV Reverse Polarity
Night Reverse Charging
Utility input overvoltage
Utility input under voltage
Battery Over Discharge
Load output Short Circuit
Load output Overload